Open allClose all

Engine

• Perkins 404J-E22T, 45 kW / 61 HP, Stage V

Steering system

• Hydrostatic all-wheel steering
• Steering angle max. 2 x 40
• Oscillating angle of the rear axle: ± 8°
• Steering cylinder: 2

Tires

• 10.5/80-18 AS ET0

Drive system

• Hydrostatic all-wheel drive system, travel direction can be chosen via joystick
• Operating brake: Mechanical disc brake (combined with parking brake)
• Central service and parking brake in the drive train acts on all 4 wheels

Hydraulics

• 3rd Front control circuit proportional via joystick incl double detent
• Hydraulic oil cooler
• VLS (Vertical Lift System)
• Damping in telescopic cylinder and lifting cylinder (lifting)

Operator's cab & Cabine

• Cab with heating and ventilation ROPS / FOPS tested with VSG safety window on the right side
• Comfort seat with safety belt
• Hydraulically pilot-controlled joystick with direction switch and proportional telescopic function
• Operating hour meter
• Fuel display
• Roof window wiper
• Tilt display

Other

• Work lights, 1 in front and 1 in rear
• Lighting equipment according to StVZO (road traffic licensing regulations)
• TÜV-report for road travel
• Reversing alarm (acoustic)

Open allClose all

Operator's cab

• Complete radio
• Radio-ready (antenna, speaker)
• Air-conditioning system
• Windshield protective grating
• Adjustable steering column (inclination and height)
• cab elevation (+ 200 mm)

Operator's seat

• Fabric seat; heated seat
• Artificial leather seat
• Artificial leather seat; heated seat
• Fabric seat; air cushioned
• Fabric seat; air cushioned; heated seat

Lighting

• Working lights 1 front, 1 rear on the cab, additional
• Work lights, 1 in front on telescopic arm
• LED working lights, 2 in front, 2 in rear
• LED working lights, 1 in front on telescopic arm
• Rotating beacon (yellow) (National regulations must be observed!)

StVZO – equipment

• Individual operating permit > 25 km/h
• Registration plate mounting

Engine

• Engine pre-heating (coolant) + hydraulic oil pre-heating 230 V
• Manual throttle
• Cyclone prefilter

Drive system & Axles

• PAL1530 axle, hydrostatic high-pressure all-wheel drive, 20 km/h, (transfer case, universal joint shaft, differential lock 100%)
• PAL1530 axle, hydrostatic high-pressure all-wheel drive, 30 km/h, (transfer case, universal joint shaft, differential lock 100%)
• 30 km/h (Speed increase)
• Hand inching (low-speed control)
• Adjustment steering modes (front wheel and crab steering)
• Loading swing arm damping

Tires

• 325/70 R 18 AS ET0
• 425/50-18 AS ET36
• 15.5/55 R 18 EM ET50
• 12.0/75-18 MPT ET0

Quick change plates

• Skid steer hydraulic
• SMS hydraulic

Hydraulics in front

• Unpressurized return in the front
• High flow - power hydraulics single-acting 100 l/min, (operation: Via switch (0 - 1))
• Reversing valve in front on 3rd control circuit (3rd control circuit with 4 connections), (operation: Selection via button on joystick)
• 3rd control circuit, electrically proportional serial, (loading swing arm can be operated together with 3rd control circuit)
• Quick coupling Faster 4-fold - machine side
• Quick coupling Faster 4-fold - attachment side
• Pressure release of 3rd Control circuit in front on telescopic arm

Hydraulics in rear

• Unpressurized return in rear
• Rear hydraulic connection, additional double-acting incl. separate control valve, (operation: Via switch), (loading swing arm or 3rd control circuit can be operated simultaneously
• Three-point rear lift cat. II (max. lifting capacity 2200 kg)
• PTO 540 rpm, hydraulically driven
• Three-point rear linkage cat. II / PTO 540 rpm / additional hydraulic connection at the rear

Bio-hydraulic oil

• Panolin HLP Synt46 (Biohydraulic oil)

Electrical connections in front

• Socket front 13-pin (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Function push-button, 2nd Function latching)
• Socket front 13-pin (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Function latching, 2nd Function push-button)
• Socket front 13-pin (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Function push-button, 2nd Function push-button)
• Socket front 13-pin (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Function latching, 2nd Function latching)

Electrical connections in rear

• Rear socket 7-pole for lighting of rear attachments

Other

• Hand lever grease press
• Combination bag (warning triangle / first aid kit)
• Tool box
• Closed underbody guard
• Fully automatic central lubrication unit

Custom-made paint finish

• Special painting RAL single-color - instead of Wacker Neuson yellow
• Special painting RAL multi-color

Trailer and recovery equipment

• Towing hitch self-recovery coupling
• Automatic trailer coupling
• Ball hitch coupling K50
• Mirror for trailer hitch

Self-propelled work machines with ball hitch

• Automatic trailer coupling

Approval as tractor

• Tractor multi-equipment carrier