TH412

Wacker Neuson telehandler TH412 in action with pallet fork

Standard Components

  • Yanmar 3 TNV 80 FT, 18,4 kW / 25 PS, EU: Level V
  • Hydraulic all-wheel steering with end-of-travel synchronization
  • Steering angle max.: 2x38°
  • Caster angle Rear axle: ± 7°
  • Steering cylinder: 2
  • 255/75 - 15.3 (10.0/75 - 15.3) Starco AS ET-40, Profil AS, Width 1560 mm, Height 1995 mm
  • Cabin with heater and ventilation ROPS / FOPS tested with VSG safety glazing on the right side
  • Front, roof and rear windscreen wipers
  • Heated rear windscreen
  • Tilt display
  • Armrest with storage compartment
  • Sun blind
  • Bottle holder
  • Storage net
  • Fully damped comfort seat with safety belt, weight, back and height adjustment
  • Lighting system in accordance with the StVZO
  • Work lights LED Basic (1000 lm) on the cab, 1 in front, 1 in back
  • Axis: Planetary steering axle PAL1165
  • Drive: hydrostatic via transfer case and driveshaft, electronically controlled
  • Driving modes: Auto mode; ECO mode (engine speed reduction when the set speed is reached)
  • Speed: 20 km/h
  • Speed settings: 2 | 7 km/h / 20 km/h (Optional 30)
  • Service brake: Hydraulically operated disc brake on the front axle, acting on the rear axle via a driveshaft
  • Parking brake: Electro-hydraulic spring-loaded brake on the front axle, acting on the rear axle via a drive shaft, including auto-hold function
  • Telescopic arm Hub height 4537 mm
  • Quick-change coupler (Wacker Neuson HV/TH-C) – hydraulic
  • Lifting cylinder: 1
  • Tilt cylinder: 1
  • Mechanically piloted joystick with direction switch and telescoping function
  • 3. Steering wheel front via lever
  • Connections Flat Face Size 2
  • VLS (Vertical Lift System)
  • Hydraulic oil cooler
  • Reversing alarm (audible)
  • EquipCare (incl. App & Manager)

Options

  • Protective grille windshield, removable
  • Seat faux leather; air suspension
  • Seat Fabric; Air suspension
  • Seat Fabric; Air Suspension; Heated Seats
  • Air conditioning
  • Radio pre-installation DAB (antenna, speakers)
  • Radio DAB (full set)
  • 2 outlets: 2xUSB / 3-pin
  • Adjustable steering column (tilt and height)
  • LED lighting in accordance with the German Road Traffic Licensing Regulations (StVZO)
  • Work lights LED Basic (1000 lm) on the cab roof, 2 in front, 1 in back
  • Work light LED Basic (1000 lm) on telescopic arm, 1 front
  • Work lights LED Performance (2000 lm) on the roof, 2 in front, 2 in back
  • Work light LED Performance (2000 lm) on telescopic arm, 1 front
  • Rotating beacon LED (orange), (National regulations must be observed)
  • Individual operating permit > 25 km/h
  • License plate holder (front and rear, small)
  • Warning markings (National regulations must be followed!)
  • Diesel engine Yanmar 3TNV86, 33.3 kW / 45 hp (operating range: -15°C to 45°C!)
  • Hand throttle
  • Engine Preheater (Coolant) Hydraulic Oil Preheater 230 V
  • Reverse flow

Axles

  • Planetary Axle PAL1165, hydrostatic medium-pressure all-wheel drive, 100% differential lock

Driving mode

  • Driving Mode Auto / Eco / Attachments
  • Drive Mode Auto / Eco / M-Drive

Travel speed

  • Speed limiter proportional (slow-speed control)
  • 30 km/h (increase in speed)

 

  • Adjustment Steering Modes

 

 

 

  • 31 x 15.50 - 15 BKT TR 313 ET0, Profil AS, Width 1560 mm, Height 1992 mm
  • 400 / 50 - 15 (31x15.5-15) Starco AS ET0, Profil AS, Width 1560 mm, Height 1997 mm
  • 270 / 65 - 16.5 (10-16.5) Kenda Power Grip ET-40, Profile EM, Width 1560 mm, Height 2000 mm
  • 400 / 50 - 15 Starco Turf Tech ET0, RP profile, width 1560 mm, height 1995 mm
  • 270 / 65 - 16.5 (10-16.5) Kenda Rock Grip ET-40, SureTrax tread, width 1560 mm, height 2000 mm
  • 315/55R16 Continental MPT81 ET-30, Profile MPT81, 1560 mm, Height 1990 mm

Quick-change plates

  • SkidSteer (hydraulic SAE J2513 SSL HV)
  • SMS HV (hydraulic)
  • Kramer HV/TH - C (hydraulic)
  • Shell Panolin S4 HLP Synth46 (biohydraulic oil)
  • 3. Control circuit via lever (two Flatface size 2 couplings), including detent for single control lever
  • 3. Control circuit proportional incl. hold function % via switch, (Operation: (via the control wheel on the front of the joystick)
  • High-flow power hydraulics, single-acting (70 l/min), (two couplings: 1 x flat face, size 4A, male connector / 1 x flat face, size 4A, female connector), (Operation: About the switch (0–1) and the lever for 3. Control circuit)
  • Non-pressurized return line, front (1 x Flatface Size 3, plug) incl. leak detection line (1 x Flatface Size 2, plug)
  • Quick-connect coupling Faster 2-way machine side
  • Quick-connect coupling Faster 2-way machine side attachment side
  • Quick-connect coupling Faster 2x 2-way machine-side
  • Quick-connect coupling Faster 2x 2-way machine side attachment side
  • Switching valve front on the 3rd Control circuit (3. Control circuit with 4 flat-face couplings (size 2), (Operation: Selection via switch (0–1)
  • Pressure relief 3. Control circuit at the front of the telescopic arm
  • Hydraulic connection rear double-acting via directional control valve (two couplings, SVK size 3), (3. Steering wheel (front or rear), (Operation: About the switch (0–1) 3. Control circuit)
  • Hydraulic connection (rear, double-acting) (two SVK couplings, size 3), including separate control valve, (Operation: About the switch (1-0-2)
  • Battery Disconnect Switch 2 Circuits (Disconnects the vehicle electrical system and the alternator from the battery via two separate circuits)

front

  • Front socket, 13-pin (2x electrical functions E1/E2 and lighting), (Operation: About the 2 buttons on the joystick; 1. Function key, 2. Function Lock)

at the back

  • Rear 3-pin socket (2x electrical functions E3/ E4, switchable to front outlet), (Operation: About Switches; 1. Function Latching, 2. Function lock)
  • 7-pin rear socket for lighting and rear-mounted equipment
  • Immobilizer Ignition Key (Operated via a coded ignition key)
  • EquipCare Dual ID, (Keypad Operation)
  • Custom paint job RAL solid color instead of Wacker Neuson yellow
  • Custom paint job RAL multicolor (excluding front and rear axles)
  • Toolbox tool set hand-operated grease gun
  • Combination bag (warning triangle and first-aid kit)
  • Central lubrication system fully automatic
  • Self-loading device (Not approved for use with a trailer!)
  • Shunting coupler (Not approved for use with trailers!)
  • Tow bar with ball head, K50
  • 38 mm hitch, automatic
  • Shunting Coupler + Towing Device Ball Head K50
  • Automatic hitch K50 ball-head hitch
  • 38 mm hitch, automatic
  • Tractor multi-equipment carrier
  • Please note that the product range may vary depending on the country. Under certain circumstances, the contents / products shown here may not be available in your country. The illustrations, equipment, and data shown may also differ from the current product range in your country. Optional extras may be shown that are subject to an additional charge. Subject to changes.
  • Delivery times can vary - subject to prior sale.
  • With the selection of different options, the technical data of the products can vary accordingly. Please note that equipment cannot be changed for editions.
  • The engines shown may differ from the current delivery range in your country. Special equipment is depicted here that may be subject to extra charge. Subject to change without notice.

Contact us

* Mandatory fields
Contact Contact

Contact

Phone number: +61 (0)3 9549 0000