EZ50

EZ50 and DW40 in action on a constuction site

Tracked Zero Tail Excavator EZ50: The compact and powerful zero-tail excavator

Full speed ahead: The EZ50 mini-excavator offers excellent lifting and digging power as well as quick work cycles. Using the newest technologies, the emissions of the mini-excavator were reduced and, at the same time, the efficiency increased. For example, the powerful engine in the EZ50 meets the stage 5 exhaust emission standards. In terms of operator-friendliness, the excavator is impressive. The intuitive operating concept and excellent view of the work area contribute to the easy and comfortable operation of the machine. The EZ50 is also a zero-tail excavator and is well suited for working in narrow spaces.

Tracked Zero Tail Excavator EZ50

Flexible cylinder rod protection

  • The cylinders and the cylinder rods are protected from damage thanks to the plastic rails, which lengthens their service life and saves costs. Due to their flexible material, they return to their original shape after an impact. Their appearance and characteristics are completely retained.
Tracked Zero Tail Excavator EZ50

3-point kinematics

  • With 3-point kinematics, the conventional bucket linkage has been taken to a new level. This "3-bolt" design extends the bucket's angle of rotation to 200 degrees - 10% more than conventional bucket linkage. This increases the vertical dig depth as well as the digging forces. This eliminates the need to reposition the excavator as often, significantly increasing efficiency.
Tracked Zero Tail Excavator EZ50

Active Working Signal (AWS)

  • The red LED strip running diagonally over the engine hood lights up when the joystick control is pressed down. This signals to bystanders nearby that the excavator is ready for operation and can be moved at any time.
Tracked Zero Tail Excavator EZ50

Load Sensing Flow Sharing

  • Load Sensing Flow Sharing enables precise and efficient control of the excavator. The machine adjusts to the load and the joystick movements are always kept the same for the operator.
  • The hydraulics work more efficiently, saving energy and ultimately costs. But it also makes operation easier for the operator.
  • Load-sensing systems help to regulate the flow rate according to demand. The less power is used, the lower the fuel consumption.
EZ50 Zero Tail

Zero Tail

  • When space is limited: Pivot safely, even in the tightest of spaces or right next to the wall - with the Zerotail excavator without rear overhang, no problem.
  • Optimal working in limited working conditions, high maneuverability and time savings are guaranteed.

More Features

Tracked Zero Tail Excavator EZ50

Large ergonomic comfort cab

  • The ergonomically optimized comfort cab offers very good 360° visibility, plenty of legroom and headroom and a wide entry. This promotes a high level of safety and flexibility in the work space, adjusted to the individual needs of the operator.
Tracked Zero Tail Excavator EZ50

10 large tie-downs

  • 6 large lashing eyes on the chassis frame and 4 more on the superstructure ensure easy and fast tie and secure transport of the machine.
  • The eyelets are perfectly positioned for secure attachment of the machine and are also suitable for large hooks.
Tracked Zero Tail Excavator EZ50

USB port

  • Combined with a radio, the option of convenient cellphone charging is available.
Tracked Zero Tail Excavator EZ50

Innovative front windshield system

  • The windshields can be adjusted to any condition on the construction site. Closed, they are water- and windproof. The upper front window can be pushed under the cabin roof. The lower pane serves as splash protection. The lower windshield slides behind the upper window, making it ideal for talking with colleagues. If necessary, both windows are pushed below the cabin roof, where they are stored safely.
  • The two-part front window allows for optimal ventilation in the cabin in any weather. In addition, it makes it easier to communicate with the operator. A separate removal and storage of the window is a thing of the past.
  • Significantly lower risk of damage or loss; higher level of operating comfort
Tracked Zero Tail Excavator EZ50

Windshield wiper motor integrated in A-pillar

  • The wiping direction from top to bottom provides better cleaning, while the new positioning of the motor in the A-pillar and its cabling prevent any restriction of visibility.
Tracked Zero Tail Excavator EZ50

Numerous attachments

  • Thanks to the optional additional control circuits, our excavators can be equipped with a variety of attachments. This way, you can increase your application options in no time and thus increase the utilization of your excavator.
Tracked Zero Tail Excavator EZ50

Hydraulic thumb

  • The optional hydraulic thumb offers, beside a conventional bucket application, a grip function, which expands the spectrum of applications.
  • With this additional grip function, material can be cleared away quite easily.
Tracked Zero Tail Excavator EZ50

Hose guidance by swiveling bracket

  • Optimum hose routing through the swiveling bracket provides the best possible protection for the hoses against external influences, which extends their service life. The field of vision is not restricted and abrasion of the hoses is significantly reduced.
Tracked Zero Tail Excavator EZ50

LED work lights

  • The durable LED headlights enable safe working through the all-round lighting in the dark. Optimal illumination of the work area ensures a higher level of machine utilization, even in dark visibility conditions. The headlights on the chassis ensure that the work area is well illuminated, even when the machine is panning.
  • The best illumination and long service life as a result of the LED technology.
ET42 lashing eyes

Guided track rollers outside

  • In particular for lifting heavy loads, the externally located guide track rollers as well as an optimized weight distribution give the excavators a higher lateral stability.
Tracked Zero Tail Excavator EZ50

Hydraulic swivelling dozer blade

  • The swivel blade can be swiveled straight or variably by up to 25 degrees to the left or right. This way, the machine does not have to be reset in one direction as often during longer-lasting backfilling tasks. In the floating position, the dozer blade automatically follows the contour of the ground, so that the driver doesn’t have to make adjustments.
  • Infinitely variable swivelling with floating position for more flexibility and efficiency.
Tracked Zero Tail Excavator EZ50

New positioning of the exhaust system

  • Hot exhaust gases are directed upwards, avoiding possible damage to people or objects. This is a particular advantage in gardening and landscaping (e.g. trench and canal construction). In addition, the stirring up of dust on the ground is considerably reduced.
Tracked Zero Tail Excavator EZ50

Stage V emission standards

  • To implement this European emissions directive, we install state-of-the-art engine technologies equipped with exhaust gas aftertreatment systems. DPF regeneration takes place automatically when required and during normal working operation. Therefore, no standstill regeneration is necessary and the working cycle is not interrupted. The more stable coolant temperature increases the lifetime of the diesel engine and, thanks to thermal management, also the efficiency of the cab heater.
  • New technology to increase efficiency and reduce exhaust emissions - reducing harmful diesel particulate, hydrocarbons, and carbon monoxide emissions. The filter does not require additives, nor a burner or additional power sources, and the operator is not required to intervene manually.
Tracked Zero Tail Excavator EZ50

Thermal resistance

  • The excavator can work under full load up to an ambient temperature of 45°C/113°F. The stable temperature level results in a longer service life for the hydraulic components and increases productivity.
  • Lower temperature level - longer life, work without loss of performance.
Tracked Zero Tail Excavator EZ50

High cab comfort with excellent ergonomics and air-conditioning system

  • The intuitive operating concept allows for the simple and comprehensive control of the excavator. The joystick, 3.5-inch display, jog dial, and keypad are used to operate the machine, store attachments, control auxiliary circuits or set oil quantities. The well-placed discharge nozzles create a pleasant cab temperature and enable fatigue-free working. The air conditioning system enables a cool down of up to 16 ° C/61° F (at an outside temperature of 38°C/100° F) and this in half the specified ISO standard time.

Contact us

* Mandatory fields