Adjustable steering column (inclination and height)
Comfort seat with full suspension, weight, back and height adjustment
LED road lights (headlights, tail lights, turn signals)
LED work lights, 2 front, 1 rear
Axle: PA940 planetary axle
Hydrostatic drive via transfer case and drive shaft, electronically controlled
Differential lock: 100% front and rear axle, on demand via joystick button
Driving modes: Auto mode; ECO mode (reduction of engine speed when set speed is reached)
Speed: 20 km/h
Operating brake: Multiple-disc brake on front axle acting on rear axle via universal joint shaft
Parking brake: Electro-hydraulic multi-disc brake with spring mechanism in the front axle, acting on rear axle via universal joint shaft incl. hill-hold function
Kinematics: P
Lifting cylinder: 2
Tipping cylinder: 1
Floating position for lift and tipping cylinders
Mechanically pilot controlled joystick with direction switch
3rd Front control circuit via lever with single detent for continuous function
Planetary Axle PA940, Hydrostatic High-Pressure All-Wheel Drive, 100% Differential Lock at 20 km/h (30 km/h)
Thrust limitation
Driving mode
Driving Mode Auto / Eco / Attachments
Drive Mode Auto / Eco / M-Drive
Travel speed
30 km/h (increase in speed)
Speed limiter proportional (slow-speed control)
Tires
31 x 15.50 - 15 BKT SkidPower HD ET0, EM tread, width 1345 mm, Höhe 2325 mm
31 x 15.50 - 15 BKT SkidPower HD ET-37, EM tread, width 1419 mm, Höhe 2325 mm
400/50 - 15 (31x15.5-15) Starco AS ET0, Profile AS, Width 1325 mm, Height 2320 mm
400 / 50 - 15 (31x15.5-15) Starco AS ET-37, Profil AS, Width 1399 mm, Height 2320 mm
31 x 15.50 - 15 BKT TracMaster ET0, Profile RP, Width 1350 mm, Height 2335 mm
10 - 16.5 BKT SureTrax HD ET40, SureTrax tire, width 1128 mm, width when turned 1300 mm, height 2322 mm
12 - 16.5 BKT SureTrax ET45, SureTrax tire, width 1175 mm, width when turned 1370 mm, height 2357 mm
315/55R16 Continental MPT81 ET-30, MPT81 width, width 1305 mm, height 2305 mm
Tires turned
Quick-change plates
SkidSteer (hydraulic SAE J2513 SSL HV)
SMS HV (hydraulic)
Kramer HV / WL - C (hydraulic)
Lowering brake valve (with pipe rupture protection, lifting, and tilting cylinders), including float position
Load-dependent damping
Shell Panolin S4 HLP Synth46 (biohydraulic oil)
3. Control circuit proportional incl. hold function % via switch, (pressure relief 3. Control circuit (front of the loading station), (oil volume adjustment), (Operation: (via the control wheel on the front of the joystick)
4. Control loop proportional serial (Includes: CHY_LOADHYDA_007 3. Control circuit (proportional), including continuous operation via switch, <x id=\ Control panel at the front of the loading station, (Operation: (via the control wheel at the top of the joystick)</li>
Working hydraulics: 22.5 cc/min (58.5 l/min)
High-Flow Power Hydraulics, single-acting (84 l/min), including pressureless return and drain line, (two couplings: 1 x Flatface Size 4A, plug / 1x Flatface size 4A, female), (Operation: (switch (0 - 1))
Non-pressurized return line, front (1 x Flatface Size 3, plug) including leak detection line (1 x Flatface Size 2, plug)
Quick-connect coupling Faster 2-way machine-side
Quick-connect coupling Faster 2-way machine side attachment side
Quick-connect coupling Faster 2x 2-way - machine side
Quick-connect coupling Faster 2x 2-way machine side attachment side
One hydraulic connection at the rear, double-acting via a directional control valve (two SVK couplings, size 3), (3. Steering wheel (front or rear), (Operation: About the switch (0–1) 3. Control circuit)
Two double-acting hydraulic connections at the rear (four SVK size 3 couplings), including a separate control valve (25 l/min), (Operation: About 2 switches (1 - 0 - 2)
Unpressurized return line (rear) (1 x SVK size 3, plug) incl. leak detection line (1 x Flatface size 2, plug)
Additional control unit
Battery isolator switch 2 circuits (isolation of the vehicle electrical system and the generator from the battery via two separate switching paths)
Front electrical connections
Front socket, 13-pin (2x electrical functions E1/E2 and lighting), (Operation: About the 2 buttons on the joystick; 1. Function key, 2. Function lock)
Rear electrical connections
Rear 3-pin outlet (2x electrical functions E3/E4, switchable to front outlet), (Operation: About Switches; 1. Function lock, 2. Function lock)
7-pin rear socket for lighting and rear-mounted equipment
14 pin electric connector (front) for attachment functions
Backup alarm
Counterweight - 220 lbs (100 kg), rear mounted under frame
Please note that the product range may vary depending on the country. Under certain circumstances, the contents / products shown here may not be available in your country. The illustrations, equipment, and data shown may also differ from the current product range in your country. Optional extras may be shown that are subject to an additional charge. Subject to changes.
Delivery times can vary - subject to prior sale.
With the selection of different options, the technical data of the products can vary accordingly. Please note that equipment cannot be changed for editions.
The engines shown may differ from the current delivery range in your country. Special equipment is depicted here that may be subject to extra charge. Subject to change without notice.
Thank you
Thank you, your request has been sent successfully
Contact
